Application

Step 1: Sanitise, prep and push back cuticles
Step 2: Gently remove the shine using the 100/180 buffer in the direction of nail growth
Step 3: Apply CCO Base Coat in a thin application from cuticle to free edges and seal the edges of the nail.
Step 4: Place nails under either:
·       LED UV Lamp for 60 seconds; or
·       UV Lamp for 2 minutes
Step 5: Apply CCO Colour in a THIN application from cuticle to free edges and seal the edges of the nail.
Step 6: Place hand in:
·       LED UV Lamp for 60 seconds; or
·       UV Lamp for 2 minutes
Step 7: Repeat Steps 5 & 6 as required to give the depth of colour
Step 8: Apply Gel-Us!Top Coat in a thin application from cuticle to free edges and seal the edges of the nail.
Step 9: Place hand in:
·       LED UV Lamp for 60 seconds; or
·       UV Lamp for 2 minutes
10: Wipe off the tacky layer with a lint free wipe soaked in nail cleanser for a durable, shiny finish.
NOTE: do not remove the sticky residue left by each layer until the end as this helps the layers to adhere better to the nail.

Removal

How To Soak Off
Step 1: Use 180 girt file. Gently file the surface of the gel polish to break the seal and remove the shine.
Step 2: Place a cotton wipe saturated with Gel-Us! remover over the nail.
Step 3: Wrap up foil for 10 minutes. Thereafter, gently remove gel with the wood stick.
Step 4: Use 220/280 buffer to lightly buff surface of nail.
Step 5: Apply hand and nail nourish cuticle oil.
NOTE: If you have done fill maintenance on the nails, the removal time maybe longer.

Contact

Zest Cosmetics Ltd
HG5 8NN

morperfume@btinternet.com